Documents
- ESTOMAD legacy
- Press releases
- Leaflets
- Journal publications
- Conference publications, posters and presentations
- Articles in (industrial) magazines and newsletters
- Presentations at targeted external industrial events
- Public deliverables
- ESTOMAD movies
ESTOMAD legacy
Press releases:
- Factories Go Green - Energy software tools for sustainable machine design - April 2011
- FMTC coordinates European Research on Design Methods For Energy Efficient Machines - May 2010
Leaflets:
- Green weaving: Picanol pioneers the early-stage design of energy-efficient machinery - July 2012
- Virtual Components for Machinery Design by ITIA - May 2011
- Estomad Project Leaflet - September 2010
Journal publications:
- Palmgren and SKF models with updated parameters for a needle roller bearing lubricated with solid grease, S. Iqbal, A. Partogi, F. Al-Bender, B. Pluymers, W. Desmet, in preparation for publication in Wiley: Lubrication Science
- Frictional power loss in solid grease lubricated needle roller bearing, S. Iqbal, J. Croes, F. Al-Bender, B. Pluymers, W. Desmet, Wiley: Lubrication Science, doi: 10.1002/ls.1195 (June 2012)
Conference publications, posters and presentations:
- A combined 1D-3D simulation approach for the energy analysis of a high speed weaving machine, J. Croes, A. Reveillere, S. Iqbal, D. Coemelck, B. Pluymers, W. Desmet. ISMA2012 International Conference on Noise and Vibration Engineering, September 17-19, 2012, Leuven, 2012, pp. 2253-2269: paper and poster
- Model based design brought to practice via virtual components for energy modeling, G. Bianchi, M. Leonesio, D. Vanhooydonck, W. Symens. Mechatronics2012 Conference, September 17-19, 2012, Trauner Verlag, Johannes Kepler University Linz, Austria, 2012: paper and presentation
- Time-constrained energy-optimal motion control: application to a badminton robot , J. Stoev, G. Pinte, W. Symens. Mechatronics2012 Conference, September 17-19, 2012, Trauner Verlag, Johannes Kepler University Linz, Austria, 2012: paper and presentation
- A Virtual Component approach for energy consumption modeling in the machinery sector , M. Lionesio G. Bianchi, S. Borgia. ASME 2012 11th Biennal conference on Engineering Systems design and Analysis, July 4-6, 2012, Nantes, France, 2012: paper and presentation
- Energy Software Tools for Sustainable Machine Design, D. Vanhooydonck, W. Symens. Poster presentation at FMTC symposium, December 14, 2011, Gent, Belgium: poster
- Bearing Frictional Power Loss Models, S. Iqbal. Poster presentation at FMTC symposium, December 14, 2011, Gent, Belgium: poster
- Three candidates for "vertaalonderzoek", W. Symens, presentation at the Eco-Mechatronics workshop, November 23, 2011: presentation
- More efficient machines through model based design, W. Symens, presentation at the SIRRIS Energy Efficient Production seminar, November 8, 2011: presentation
- Energy Efficiency Management in Vehicles and Machines, B. Pluymers, presentation at the CLEPA RTD meeting, November 8, 2011
- ESTOMAD methodology presentation, J. Croes, S. Iqbal, B. Pluymers, W. Desmet, at the INA Schaeffler Technology Days, October 19-20, 2011, Verona, Italy: presentation
- Transmitted power and energy flow behavior of degrading wet friction clutches, S. Iqbal, T. Janssens, W. Desmet, F. Al-Bender, Proceedings of the 2011 International Conference on Energy, Water and Environment (ICEWE2011), September 17, 2011, Bhubaneswar, India: paper and presentation
- Impact of the Trajectory Generation Strategy on the Driveline Efficiency of a Multi-Axial Robot, N. Kalenda, W. Symens, 2011 IEEE-ASME International Conference on Advanced Intelligent Mechatronics AIM2011, July 4-6, 2011, Budapest, Hungary: paper and presentation
- Evaluation of the energy consumption in machine tool: a combined analytical experimental approach, P. Albertelli, G. Bianchi, A. Bigliani, S. Borgia, A. Matta, E. Zanotti, A. Bigliani, Proceedings of the 13th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprise (MITIP), June 22-24, 2011, Trondheim, Norway: paper and presentation
- Energy Software Tools for Sustainable Machine Design, N. Kalenda, W. Symens, Poster presentation at ISMA2010 International Conference on Noise and Vibration Engineering, September 20-23, 2010, Leuven, Belgium: poster
Articles in (industrial) magazines and newsletters:
- Efficiëntere machines door modelgebaseerd ontwerp (Dutch) - Techniline, January 10, 2012
- Ecodesign van complexe machines met behulp van virtuele componenten (Dutch) - Techniline, March 2, 2012
Presentations at targeted external industrial events:
- Progettare per l'efficienza energetica, G. Bianchi, Presentation at Schaeffler- Innovation Day - Production Machinery, May 23-24, 2012, Lazese, Italy
- ESTOMAD: Energy Software Tools for Sustainable Machine Design, W. Symens, Presentation at Automation and Engineering, May 10, 2012, Brussels, Belgium
- More efficient machines through model-based design, W. Symens, Presentation at the Model-Driven Development Day, May 9, 2012, 's-Hertogenbosch, The Netherlands
- Analisi energetica di una macchina utensile (Energetic analysis of a utility machine), G. Bianchi, Presentation at the Produrre Innovazione Machine Tools and Mechanics Forum, June 24, 2011, Borromeo, Milano
- ESTOMAD Energy Software Tools for Sustainable Machine Design, A. Macheta, S. Kania, Presentation at the ITM Poland, Innovations Technologies Machines Fair, June 14-17, 2011, Poznan, Poland
- ESTOMAD contribution to IMAGINE/LMS lecture on "Analysis Leads Design Frontloading CAE Simulation in the Mechatronics Engineering Process.", J. Croes, Industrial Workshop for Belgium Technological Companies, June 1st, 2011, Ostend, Belgium
- Analisi energetica di una macchina utensile (Energetic analysis of a machine tool), G. Bianchi, Presentation at Workshop organized by the Associazione Tecnica dell’Automobile (Italian Technical Car Association) on: Machining, Sustainability and Innovative technologies as competitive factors for the manufacturing industry, April 12, 2011, Turino, Italy
- Macchine utensili ed efficienza energetica (Machine tools and energetic efficiency), G. Bianchi, Presentation at the BIMU BiAnnual Machine Tool Fair 2010 at a seminar organized by UCIMU (the Italian Association of Machine Tool builders), October 5, 2010, Milano Fair, Rho, Italy
- ESTOMAD Energy Software Tools for Sustainable Machine Design, D. Panarese, Poster presentation at the Innovation Fair / Festival dell'innovazione, October 1-3, 2010, Bari, Italy
- ESTOMAD - Energy Software Tools for Sustainable Machine Design, B. Pluymers, Brokerage presentation at the Industrial Technologies conference, September 7-9, 2010, Brussels, Belgium
Public deliverables:
- Deliverable 1.5 - Benchmarks
- Deliverable 2.1 - Methodology for individual components:
- Overview document
- Literature survey gears
- Literature survey worm gears
- Literature survey seals
- Literature survey bearings
- Literature survey machine feed axes and transmission
- Literature survey hydraulic losses
- Literature survey electrical drives
- Literature survey machine tool cooling systems
- Literature survey machine tool technological actuator - the spindle
- Literature survey power consumption for peripheral modules of a machine tool
- Modeling from an experimental point of view
- Numerical controller
- Deliverable 3.3 - Design for energy efficiency approach
- Deliverable 4.3 - Verification of ESTOMAD software
- Deliverable 5.5 - Verification on industrial use cases
- Demonstrator text and movie
ESTOMAD movies:
- ESTOMAD approach applied to a badminton robot:
- Announcement of the final workshop:
- ESTOMAD demonstration movie for a XY positioning system:
- Demonstration of the project results on a badminton robot: